If you’re thinking about exterior staining your new wood siding instead of painting it, or you’re interested in staining any other type of wood in your home, it’s important that you have a good understanding of the process before you begin.
Like so many other DIY home improvement projects, the best results can only be achieved with proper, careful preparation. So, in this guide, we’ll go over the steps you’ll need to take in order to prepare your wood – and stain it like a pro! Let’s get started now.
1. Start Scrapin’
First things first, you’ll need to scrape off any old paint or flaking exterior stain before you start staining the wood. The easiest and most inexpensive way to do this is with a paint scraper. Using the scraper, press deeply into the wood, and remove the old paint section by section.
You can also use a power washer, if desired – however, this is a bit more difficult, and you may not want to pay for a power washer rental. Follow manufacturer instructions on the power washer to remove paint.
2. Clean, Clean, Clean!
After paint has been removed from the wood, or the old stain has been stripped away, it’s time to clean! Whether you’ve got an older deck or wood siding, or a brand new installation, you’ll want to clean thoroughly to avoid mildew, dirt stains, and other issues.
Use a proper wood cleaning soap. Wet the area before application, and use a roller or sprayer to apply. Then, rinse it off with a garden hose or a low-power pressure washer.
3. Check for Imperfections in Wood, and Replace
After you’ve scraped and cleaned the wood, it should be easy to spot any areas that are rotting, damaged, or decayed. Replace these sections of wood for the best results. Try to pick a color and wood type that is as close to your existing wood as possible, to avoid color differences.
4. Sand Away Flakes and Splinters
Once you’ve replaced any boards or siding that are damaged or decayed, it’s time to start sanding! Take a look at the wood, and see if there are any areas that are still flaky, or which have splinters and other imperfections. Then, using a medium-grit sandpaper, sand until they’re completely smooth. This will improve stain adherence, and the ability of the wood to withstand the elements.
5. Get the Right Stain
Make sure to invest in the proper stain for your wood. You have many options, but typically the best choice is a semi-transparent stain. This allows you to recolor the wood while still preserving its original grain and appearance. However, feel free to select any stain that catches your eye!
6. Protect Your Property
Use drop cloths and plastic sheeting to protect your property, such as flooring, windows, plants and bushes, and anything else that may be harmed by the wood stain. This ensures minimal cleanup, and a better, more professional result.
7. Stain Away!
Start staining! Mix your stain thoroughly and use a roller, brush, or sprayer to apply it in a thin, even coat. Apply it in small sections, repeating the process as necessary. Try to do this on an overcast day, where the temperature is in the range of 50-90 degrees – 70 degrees is optimal.
In addition, make sure that the forecast is clear for at least two days, to ensure that the stain has plenty of time to dry before it gets wet. This will help you avoid splotching and poor results.
Follow These Prep Instructions – And Stain Like an Expert!
Whether you’re just redoing a small deck, or staining the entire exterior of your home, these preparation instructions will help you get an even, beautiful, and long-lasting result. So follow these tips for exterior staining now, and see how great your property can look!
The post Prepping Like a Pro – How to Get the Best Results During Your Exterior Staining Project appeared first on Home Business Magazine.
Source: Main home business mag
Republished by Blog Post Promoter